Bookmark and Share Email this page Email Print this page Print

NMEA Installer Training is coming to Fort Lauderdale FL June 5-8!

Apr 30, 2018

When:
Tuesday, June 5th  - Basic Marine Electronics Installer (MEI)
Wednesday, June 6th - Basic NMEA2000® Network Installer
Thursday, June 7th - Advanced Marine Electronics Installer (AMEI)
Friday, June 8th - Advanced NMEA2000® Network Installer

Where:
Fort Lauderdale, FL
Location: Courtyard Marriott Airport & Cruise Port Hotel
400 Gulf Stream Way, Dania Beach, FL, 33004 Phone 

Hotel:
NMEA has negotiated a hotel room rate of $149  for students needing to stay at the Marriott.
Please call (954) 342-8333 and mention "NMEA Meeting room block" to make a reservation.

Trainer:
Mike Spyros, Electronics Unlimited, Ft lauderdale FL

All courses run from 8:00 a.m. until 5:00 p.m. with lunch and an exam at the end of each session.

Basic Marine Electronics Installer (MEI) -
This class will present the newcomer to marine electronics with the basic information to get started installing typical modern systems.  The program will explain Ohms Law, Grounds, Batteries & Battery Chargers, DC Wiring, EMI Basics, Coaxial Cables, Antennas, NMEA Data Interfacing, Marine VHF Radios, AIS, Displays, Transducers, Radar, Heading Sensors.

Basic NMEA 2000 Network Installer  -
This class will present the newcomer with the basic information to get started installing NMEA 2000 networks. The training covers the following topics: Cables, Connectors, Specifications Physical Planning & Documentation, Power Sources & Distribution, Voltage Drop Calculations, Data Messages (Parameter Group Numbers), Connecting to Other Data Sources, Network Setup, and Troubleshooting.  Students will be guided through building a basic NMEA 2000 network at the conclusion of the training course.

Advanced Marine Electronics Installer (AMEI) -
This advanced installer class is designed for the Marine Electronics Installer (MEI) who wishes to achieve competency in advanced topic areas and concepts. An Advanced MEI credential is an indication that a mid-level installer has a working knowledge regarding commissioning of a boat and installing more complex marine electronic devices. The program will go in depth on proper installation of Computers, Ethernet, NMEA 0183, Autopilots, Radar Commissioning, Gyros & Satellite Compasses, Satellite Communications Antennas, VHF, SSB, AIS, and EMI. 
Pre-requisite: Student must have taken the basic MEI Installer Training class.

Advanced NMEA 2000 Network Installer -
The NMEA2000 advanced course focuses on installations, setup, and diagnostic troubleshooting of moderately complex NMEA 2000® networks. The class consists of a PowerPoint presentation followed by "hands on” and the included class lunch. Students split into small groups at classroom work stations equipped with NMEA 2000® networks. The purpose of the hands-on portion is to provide students with the opportunity to demonstrate proficiency in the ability to build, configure, backup network files and evaluate network conditions using the diagnostic tools shown in the class.  The training class features NMEA 2000®-certified products from  major manufacturers such as Furuno, Garmin, Simrad, Raymarine, Maretron and Actisense including multi-function displays (MFDs), Instruments and sensors of the same function which require  instancing. Most importantly, this allows students to get familiar with the diagnostic tools used in the training and offered to students at special reduced pricing from the NMEA. Please note there is absolutely no outside test equipment allowed in the class by students.
Pre-requisite: Student must have taken the basic NMEA 2000 Installer Training class.

Pricing for Basic MEI, Basic NMEA 2000, AMEI training:  $450 member / $650 non-member
Pricing for the Advanced NMEA 2000 training course is $650 member / $850 non-member

CLICK HERE TO REGISTER
 
Questions? Contact Cindy Love, 410-975-9425 or clove@nmea.org

Course materials are sent out in advance, please sign up early.

Edit Module

Add your comment: